Honda FG110 Manuel d'utilisateur télécharger pdf (Page 30)

ASSEMBLY

UNPACKING

1. Carefully remove the tiller and loose parts bag

from the carton.

The loose parts bag contains this owner’s

manual, the drag bar, and a bottle of 10W-30 oil.

2. Unfold the tiller upper handle to the operating

position as shown. Be careful not to crimp or

pinch the engine switch wires and throttle cable.

3. Tighten the handle knobs to secure the handle

in the correct operating position.

ADDING OIL

NOTICE

The tiller is shipped from the factory with no oil

in the engine. Add oil from the bottle of oil

supplied with the tiller before attempting to start

the engine.

1. Working on a level surface, tip the tiller on its

carrying handlebar as shown.

2. Remove the oil filler cap/dipstick.

3. Slowly add the recommended oil (included in the

box) to the bottom edge of the oil fill hole. Do not

overfill, as the engine oil tank capacity is small.

NOTICE

Running the engine with too little or too much oil

can cause engine damage.

4. Screw in the oil filler cap/dipstick securely.

BEFORE OPERATION

Before using the tiller, all tiller operators must read

the following chapters and sections:

• TILLER SAFETY (see page 4).

• CONTROLS (see page 7).

• BEFORE OPERATION (see page 10).

• OPERATION (see page 12).

• MAINTENANCE SCHEDULE (see page 17).

HANDLE

KNOBS

Genuine Oil

10W30 SJ

SAE

Initial fill for the

Not for Resale

FG100 MINI-TILLER

OIL FILL

HOLE

OIL BOTTLE

(INCLUDED IN BOX)

OIL LEVEL

UPPER

LIMIT

CARRYING

HANDLEBAR

OIL FILLER

CAP/DIPSTICK

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Honda FG110 Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses Honda FG110