Honda HRR216TDA Manuel d'utilisateur télécharger pdf (Page 40)

SERVICING YOUR MOWER

SPARK ARRESTER SERVICE (optional equipment)

Your lawn mower engine is not factory-equipped with a spark arrester.

In some areas, it is illegal to operate an engine without a spark

arrester. Check local laws and regulations. An optional USDA

approved spark arrester is available from an authorized Honda

servicing dealer. See page 60 for part numbers.

The spark arrester must be serviced every 100 hours to keep it

functioning as designed.

1. Allow the engine to cool, then remove the bolts from the muffler

shield. Remove the muffler shield.

2. Remove the two set screws and remove the spark arrester.

3. Check for carbon deposits on the spark arrester and the exhaust

port. Use a brush to remove any carbon deposits from the screen.

Replace the screen if it is torn or damaged.

4. Installation is the reverse of removal. Tighten all hardware

securely.

Flywheel Brake

Start the engine outdoors and move the throttle to FAST. Release the

flywheel brake lever; the engine should stop quickly. If it does not, take

your mower to an authorized Honda servicing dealer for repair.

MUFFLER

SPARK

ARRESTER

SET SCREW (2)

BOLT (3)

MUFFLER

SHIELD

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

Pas de commentaire

Honda HRR216TDA Manuel d'utilisateur Page 40