Honda HRR216TDA Manuel d'utilisateur télécharger pdf (Page 39)

SERVICING YOUR MOWER

Spark Plug Service

Recommended spark plugs: BPR6ES (NGK) or W20EPR-U (DENSO)

For good performance, the spark plug must be properly gapped and

free of deposits.

NOTICE

An incorrect spark plug can cause

engine damage.

1. Disconnect the spark plug cap

and remove dirt from the area.

2. Remove the spark plug with a

spark plug wrench.

3. Inspect the plug; replace it if the

electrodes are worn, or if the

insulator is cracked or chipped

4. Set the gap to 0.028 ~ 0.031 in

(0.7 ~ 0.8 mm).

5. Install the spark plug carefully, by

hand, to avoid cross-threading.

6. After the plug seats, tighten it as

follows to compress the washer:

Old plug: 1/8 to 1/4 turn

New plug: 1/2 turn

NOTICE

A loose spark plug can overheat and

damage the engine. Overtightening

the spark plug can damage the

threads in the cylinder head.

7. Install the spark plug cap on the spark plug.

SPARK

PLUG

SPARK PLUG CAP

SPARK PLUG WRENCH

0.028 ~ 0.031 in

(0.7 ~ 0.8 mm)

SEALING

WASHER

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Pas de commentaire

Honda HRR216TDA Manuel d'utilisateur Page 39