Honda F210 Manuel d'utilisateur télécharger pdf (Page 17)

To prepare for tilling:

Pull the wheel arm out, pivot the wheel up and release the arm.

4. Tilling depth

hen used in the field.

-------When moved on road.

Tilling depth can be adjusted by

removing the retainer and sliding

the drag bar up or down as aErArNER

necessary.

5. Handling tips

Adjust the handlebar height to a comfortable position (waist height for

normal tilling).

The drag bar should always be used when tilling. It enables you to com-

pensate for the hardness of the soil. The ideal height of the drag bar will

depend on the type of soil being tilled and soil conditions at the time of

tilling. In general, however, the drag bar should be adjusted so that the

tiller is tilted slightly backward.

If the machine jerks forward while tilling, press down on the

handlebars. This will cause the tines to dig more deeply into the soil.

If tines dig in but the machine will not move forward, move the

handlebars from side to side.

When turning, push down on the handlebars to bring the tiller’s weight

to the rear; this will make turning easier.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Pas de commentaire

Honda F210 Manuel d'utilisateur Page 17