Honda Outboard Motor BF75A Manuel d'utilisateur télécharger pdf (Page 101)

WITH OUTBOARD MOTOR

INSTALLED ON BOAT

WITH OUTBOARD MOTOR

REMOVED FROM BOAT

LHT Type (tiller handle)

LRT and XRT Types (remote

control)

All Types

TRANSPORTING

MOTOR SUPPORT BAR

(commercially available)

STEERING FRICTION ADJUSTER

When trailering a boat with the

outboard motor attached, leave the

engine in the normal running position,

if possible.

Tighten the steering friction adjuster

to prevent the outboard motor from

moving while trailering the boat.

Use a motor support bar to prevent

the outboard motor from moving

while trailering the boat. Refer to the

manufacturer’s instructions for using

a motor support bar.

If there is insufficient road clearance

in the normal running position, then

tilt the outboard motor and use a

motor support bar, or remove the

outboard motor from the boat. Refer

to the manufacturer’s instructions for

using a motor support bar.

Secure the outboard motor in either

the vertical or horizontal position

shownonp. .

The lifting eye (contact your

authoraized Honda Marine dealer to

purchase) must be installed to attach

a hoist hook for moving the outboard

motor on and off the transport

vehicle. Refer to p. for hoisting

instructions.

02/03/25 21:34:32 31ZW0601_100

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 129 130

Pas de commentaire

Honda Outboard Motor BF75A Manuel d'utilisateur Page 101